Jet Pumps
Subsurface jet pumps for hydraulic lift, from 500 to 5,000 metres deep at 10 to 2,400 m³/day. They circulate to surface for service with no pulling unit.
Learn MoreDoingitright.
Surface and subsurface pumping systems for oil and gas, built and serviced from Leduc, Alberta.
Who We Are
Rotating Right is not just a pump distributor, package fabricator or pump service company. We are all three, with over 38 years of pump expertise behind every job.
We design and build complete surface packages: pumps, skid, building, heaters, instrumentation, piping and electrical, with ABSA certification for ASME B31.1 and B31.3 piping.
Housed & Piped Packages
Turnkey, one source
From design and procurement through commissioning and start-up, one team is responsible for the whole package.
Three Pumps
of Our Own
Alongside the lines we distribute, Rotating Right has brought three pumps to market: the reciprocating electric submersible pump (RESP), the multiphase transfer pump (MTP) and a large-diameter horizontal pumping system (HPS).
RESP
A linear motor replaces the pumpjack and sucker rod: 1 to 20 strokes per minute, up to 1,500 bbl/day.
Multiphase Transfer Pump
A double-acting duplex piston pump that moves double the volume of the old simplex piston pump with less than 15% more input horsepower.
Horizontal Pumping Systems
Multistage centrifugal pumps on a heavy-duty oilfield skid, for water injection and disposal, polymer, LACT and jet pumping.
Reciprocating Plunger Pumps
Most of the packages we build are driven by a multiplex plunger pump. We sell, service and recondition them, with three Master Pump Technicians trained to Level 4 on the National Oilwell program.
Triplex Plunger Pump
- Horsepower
- 2 to 600 HP
- Pressure
- 500 to 30,000 PSI
- Flow
- To 20,000 BFPD (3,161 m³/d)
Crankshaft & Power End
The crank turns the motor's rotation into plunger strokes. Crankshafts and complete power ends are part of our exchange program.
Plungers & Packing
Plungers, packing and brass are kept in stock for the multiplex pump lines we sell and service.
Connecting Rod & Crosshead
Connecting rods and bearings are stocked as repair parts, and crossheads are part of the exchange program.
Fluid End & Valves
The suction and discharge valves sit in the fluid end, standard in nickel aluminum bronze, with 316 stainless or duplex stainless available.
Sized for
the Application
As pumping experts, information is key. We size and apply surface and subsurface pumping systems for oil, gas and water, then build, start up and service what we supply.
Multiplex plunger pumps
500 to 30,000 PSI, flow to 20,000 BFPD (3,161 m³/d), most commonly 2 to 600 HP.
Horizontal pumping systems
Multistage centrifugal pumps on a heavy-duty oilfield skid, for high pressure at medium flow rates.
Jet pump systems
500 to 5,000 metres deep at 10 to 2,400 m³/day. One surface package can run several wells.
RESP
1 to 20 strokes per minute, up to 1,500 bbl/day and 6,500 PSI discharge, run on tubing.
Multiphase transfer pump
Our own double-acting duplex piston pump for oil, gas and water in one line.
Why multiphase
Lower wellhead pressure, one pipeline instead of two, and fewer tanks and compressors on site.
Griswold and TRUFLO
Exclusive Western Canadian distributor of Griswold ANSI end suction and TRUFLO API 610 pumps.
Fluid transfer
Diaphragm, gear, vane and mag drive pumps from Hydra-Cell, Viking, Blackmer and Magnatex.
Products
Beyond the Plunger Pump
Around the pumps and packages we supply the jet pumps, progressive cavity and centrifugal pumps, filtration, drivers and reconditioned units that a pumping system needs.
Progressive Cavity Pumps
Rotating Right is a Seepex OEM for the international oil and gas market, and keeps common Seepex sizes in stock with rotors, stators, mechanical seals and packing.
Learn More
Fluid Transfer & Centrifugal
We are the exclusive Western Canadian distributor of Griswold ANSI end suction and TRUFLO API 610 pumps, with access to Grundfos, Goulds, Viking and other lines.
Learn More
Filtration
Bag and cartridge filter housings and strainers, available with CRN and ASME stamps, in carbon steel or 304 and 316 stainless.
Learn More
Engines & Generators
Diesel engines up to 900 HP, GM natural gas and propane engines, and custom generator sets up to 500 kW.
Learn More
Electric Motors
WEG and Teco Westinghouse motors for replacement and for our own packages. Most are suited to VFDs with up to a 10:1 constant torque turndown.
Learn More
Reconditioned Pumps
Reconditioned National Oilwell triplex plunger pumps, unitized on skids with motors and brought back to OEM specification.
Learn More24/7 Service,
Parts and Exchange
We are on call 24 hours a day, 7 days a week, with fully equipped field service units for plunger pump installation and maintenance, working from Leduc and our field offices in Drayton Valley and Lethbridge.
One call covers parts, reconditioning, exchange and procurement for most upstream oilfield requirements, drop-shipped to your location same day, next day or on a schedule.
Design, Construction
and Pump Schools
We design and build complete pumping and hydraulic lift systems, including piping, instrumentation, building and heaters, and optimize the surface and subsurface equipment you already run.
Our pump schools share that knowledge with your team: reciprocating multiplex, centrifugal and horizontal surface pumps, the MTP and RESP, downhole jet pump systems, variable speed drives for pumpjacks, and pumping system design.
Request a Quote. Send us the fluid, the rates and the pressures, and we will come back with a pump, a package or the parts to keep yours running.
Head office: #101, 3903 75 Avenue, Leduc, AB T9E 0K3Field offices: Drayton Valley and Lethbridgeinfo@rotatingright.com
